SMC for Sanitary Products

INTRODUCTION

Characteristics

Excellent Hot-water Resistance
Excellent Surface Gloss
Excellent Strength/Rigidity
Excellent Color Performance
Good Aging-resistance

Typical Cases

Application

For producing high-quality sanitary products with good hot-water resistance, surface gloss and mechanical properties, such as bathtubs and basins, floor and wallboard for unit bathroom, etc.

Technical Parameters

Properties	Test Standards	Untis	Typical Values
Properties	Test Standards	Untis	SWY-YG	SWY-DP	SWY-QB
Fiberglass Content	GB/T 15568-2008	wt%	25	25	23
Moulding Temperature		℃	130-150	130-150	130-150
Molding Pressure		MPa	7-10	7-10	7-10
Shrinkage		%	-0.15±0.03	0.07±0.03	0.04±0.03
Density	GB/T 1463-2005	g/cm³	≤1.9	≤1.9	≤1.9
Tensile Strength	GB/T 1447-2005	MPa	≥70	≥75	≥70
Flexural strength	GB/T 1449-2005	MPa	≥135	≥140	≥110
Flexural Modulus	GB/T 1449-2005	GPa	≥8.5	≥10.0	≥8.0
Impact Strength	GB/T 1451-2005	kJ/m²	≥50	≥65	≥45

Note: Typical value is affected by the test method.