SMC For Automobile Exterior Parts
INTRODUCTIONCharacteristics
Good Surface Flatness
Good Liquidity
High Strength
Strong Surface Adhesion
Typical Cases
Application
It can beused to make automobile hood, door panel and other products with high requirements of surface quality and painting. |  |
Technical Parameters
| Properties | Test Standards | Untis | Typical Values |
| Fiberglass Content | GB/T 15568-2008 | wt% | ≥30 |
| Moulding Temperature | / | ℃ | 130-150 |
| Moulding Pressure | / | MPa | 7-10 |
| Shrinkage | / | % | ≤0.04 |
| Density | GB/T 1463-2005 | g/cm3 | ≤1.90 |
| Tensile Strength | GB/T 1447-2005 | MPa | ≥80 |
| Flexural Strength | GB/T 1447-2005 | MPa | ≥180 |
| Flexural Modulus | GB/T 1447-2005 | GPa | ≥12 |
| Impact Strength | GB/T 1451-2005 | KJ/m2 | ≥85 |
| Flame Retardant Rating | UL-94 | / | V0@3mm |
Note:
1. Specification: The standard width of the sheet is 1000 mm. After folding, it is stored in the packing bag with shielding effect on volatiles and transported in cardboard/wooden case.
2. Storage Condition: Under 20℃ in dark.
3. Expiration Date: 30 days.