Fiberglass Pultruded Profile

INTRODUCTION

The glass fiber pultruded profile is a composite material panel made from glass fiber reinforced materials and resin through the pultrusion process.

The product modulus is concentrated in the range of 60-65GPa, mainly used for onshore 70-120 meters long wind turbine blades.

Properties	Typical Value
Properties	E7-390	E8-390
Fiber Volume Fraction%	69-73	69-72	72-74
0°Tensile Strength (MPa) Char	≥1260	≥1300	≥1400
0°Tensile Modulus (GPa) Avg	62-63	63-64	≥65
0°Compression Strength (MPa)Char	≥1100	≥1200	≥1200
0°Compression Modulus (GPa)	62-63	63-64	≥65
90°Tensile Strength (MPa) Char	≥50	≥50	≥52
90°Tensile Modulus (GPa)	≥15	≥15	≥16
90°Compression Strength (MPa) Char	≥155	≥150	≥160
90°Compression Modulus (GPa)	≥19	≥19	≥20
In-plane Shear Strength (MPa)	≥60	≥60	≥65
In-Plane Shear Modulus (GPa)	≥5	≥5	≥5.2
Interlaminar Shear Strength (MPa)	≥60	≥60	≥65
Flexural Strength (MPa)	≥1200	≥1200	≥1200
Flexural Modulus (GPa)	≥55	≥50	≥55
TG (℃)	≥105	≥105	≥105
Fatigue M R=0.1	≥8.5	≥8.5	≥8.5

Note: Typical value is affected by the test method.