Characteristics

• 

  High Strength

• 

  Good Insulation

• 

  Good Heat Resistance

• 

  High Strength Retention Rate

Vehivle Applications

Technical Parameters

Properties	Test Standard	Unit	Typical Value
Fiberglass Content	GB/T 15568-2008	wt%	48±3
Moulding Temperature	/	℃	130-150
Moulding Pressure	/	Mpa	7-10
Shrinkage	/	%	≤0.05
Density	GB/T 1463-2005	g/cm3	≤1.90
Tensile Strength	GB/T 1447-2005	MPa	≥150
Flexural Strength	GB/T 1449-2005	Mpa	≥280
Flexural Modulus	GB/T 1449-2005	GPa	≥12
Impact Strength	GB/T 1451-2005	KJ/m2	≥100
After 180℃*1000H Check the tensile and bending strength on the side	Strength Retention Rate	%	≥70
Heat-Resisting Derofmation Temperature	GB/T 1634-2004	℃	≥240
Flame Retardant Rating	UL-94	/	V0@3mm

Note: Typical value is affected by the test method.