SMC for Sanitary Products
INTRODUCTION
SMC (Sheet Molding Compound) for Bathrooms is an advanced composite material specifically engineered for the production of high-quality sanitary products, including bathtubs, wash basins, shower trays, wall panels, and floorboards for prefabricated or unit bathrooms. Thanks to its excellent balance of mechanical strength, surface aesthetics, and resistance to heat and moisture, SMC has become a preferred material for sanitary applications.
Characteristics
Excellent Hot-water Resistance
Excellent Surface Gloss
Excellent Strength/Rigidity
Excellent Color Performance
Good Aging-resistance
Typical Cases
Application
 | For producing high-quality sanitary products with good hot-water resistance, surface gloss and mechanical properties, such as bathtubs and basins, floor and wallboard for unit bathroom, etc. |
Technical Parameters
| Properties | Test Standards | Untis | Typical Values | ||
| SWY-YG | SWY-DP | SWY-QB | |||
| Fiberglass Content | GB/T 15568-2008 | wt% | 25 | 25 | 23 |
| Moulding Temperature | ℃ | 130-150 | 130-150 | 130-150 | |
| Molding Pressure | MPa | 7-10 | 7-10 | 7-10 | |
| Shrinkage | % | -0.15±0.03 | 0.07±0.03 | 0.04±0.03 | |
| Density | GB/T 1463-2005 | g/cm3 | ≤1.9 | ≤1.9 | ≤1.9 |
| Tensile Strength | GB/T 1447-2005 | MPa | ≥70 | ≥75 | ≥70 |
| Flexural strength | GB/T 1449-2005 | MPa | ≥135 | ≥140 | ≥110 |
| Flexural Modulus | GB/T 1449-2005 | GPa | ≥8.5 | ≥10.0 | ≥8.0 |
| Impact Strength | GB/T 1451-2005 | kJ/m2 | ≥50 | ≥65 | ≥45 |